Debug/Support Information in UWL.

You can disable/enable the UWL support information by doing the following:
(700 + system (so EP7 or higher)

1. Log on to the portal.

2. Navigate to the following path: system administration   > system
configuration.

3. In detailed navigation click on the UWL & Workflow folder
to expand out.

4. Then click on the Universal Worklist Administration link.

5. Scroll down to the bottom of the page:

Optional Universal Worklist Service Configuration.
Open the Tray for the Optional UWL Service Configuration.

Click on the button to open the tray for the optional UWL service
configuration.

6. Scroll down again.

7. Go into edit mode.

8. Display Support Information:   Set the parameter to false.

9. Save

This will remove/enable the detailed information from your UWL Iview. 

If your portal is lower version than 700 you can disable the parameter on the iview itself.  Display support information should be set to false if you do not want to see this detailed information.  However, if you need to troubleshoot UWL issues, this information is very very importan.

Also See...
http://wiki.sdn.sap.com/wiki/display/bpx/uwl%20faq?bc=true